BQTZZ - MURPHY OIL SOAP INDUSTRIAL

  • MSDS: BQTZZ
  • Manufacturer: MURPHY PHOENIX CO
  • Product Name: MURPHY OIL SOAP INDUSTRIAL
  • National Stock Number: 7930-00N037671
Product Identification

Product ID:MURPHY OIL SOAP INDUSTRIAL
MSDS Date:03/01/1989
FSC:7930
NIIN:00N037671
MSDS Number: BQTZZ

Responsible Party
MURPHY-PHOENIX CO
BEACHWOOD, OH 44122
US

Emergency Phone: 216-831-0404

Info Phone: 216-831-0404

Preparer: MARGE REDMAN

Cage: 5R288

Contractor
MURPHY-PHOENIX CO
BEACHWOOD, OH 44122 US

Telephone: 216-831-0404

Cage: 5R288

Ingredients

POTASSIUM SOAP; (POTASSIUM SOAP OF VEGETABLE OIL)

Fraction By Weight: 35-45%


ACETIC ACID, (ETHYLENEDINITRILO)TETRA-, TETRASODIUM SALT;

CAS: 64-02-8

RTECS: AH5075000

Fraction By Weight: 0-1%


WATER

CAS: 7732-18-5

RTECS: ZC0110000

Fraction By Weight: 54-85%

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:NOT HAZARDOUS. EYE IRRITANT.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:NONE SPECIFIED BY MANUFACTURER.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:EYES: FLUSH WITH COPIOUS VOLUMES OF WATER FOR AT LEAST 15
MINUTES WHILE HOLDING LIDS OPEN. IF IRRITATION PERSISTS, CALL A
PHYSICIAN. SKIN: FLUSH WITH COPIOUS AMOUNTS OF WATER. CALL MD .
INHAL: R EMOVE TO FRESH AIR. SUPPORT BRTHG (GIVEO*2/ARTF RESP) .
INGEST: CALL MD IMMED .

Fire Fighting

Flash Point Method:TCC
Flash Point:>250F,>121C
Extinguishing Media:WATER, WATER FOG, ALCOHOL FOAM, CARBON DIOXIDE OR
DRY CHEMICAL ARE ALL SUITABLE.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT . NONFLAMMABLE.
Unusual Fire/Explosion Hazard:NONE SPECIFIED BY MANUFACTURER.

Accidental Release

Spill Release Procedures:PROD IS BIODEGRADABLE. PLACE ANY SPILLED
MATERIAL INTO DRUMS. THEN HOSE ANY REMAINING MATERIAL TO SEWAGE
TREATMENT FACILITY, IN ACCORDANCE WITH ANY APPLICABLE REGULATIONS.
CAUTION! SPILL AREA MAY BE S LIPPERY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID PROLONGED CONTACT WITH MORE
REACTIVE ALLOYS (ALUMINUM, BRASS, BRONZE, ETC). AVOID CONTACT
W/STRONG OXIDIZING AGENTS. AVOID CONT W/EYES.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE
FOR EXPOSURE OF CONCERN .
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH THOROUGHLY AFTER USE.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Boiling Pt:B.P. Text:>220F,>104C
pH:11
Solubility in Water:COMPLETELY SOLUBLE
Appearance and Odor:AMBER, VISCOUS PASTE WITH BLAND ODOR.

Stability

Stability Indicator/Materials to Avoid:YES
PROLONGED CONTACT WITH MORE REACTIVE ALLOYS (ALUMINUM, BRASS, BRONZE,
ETC.). STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:CARBON MONOXIDE AND CARBON DIOXIDE.

Disposal

Waste Disposal Methods:DISPOSE OF DRUMS OF SPILLED MATERIAL IN A
SECURED, LANDFILL, OR OTHER SUITABLE MEANS ACCORDING TO APPLICABLE
FEDERAL, STATE AND LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.